Skip to content
Home Products Specialty Gas Equipment Cylinder Safety Equipment C-Series Custom Cylinder Cabinets
C-Series Custom Cylinder Cabinets

C-Series Custom Cylinder Cabinets

MODEL C-SERIES CUSTOM CYLINDER CABINETS

The C-Series Gas Cabinet Systems are designed to provide unparalleled protection to both the mounted gas supply system and their attached gas cylinders. Constructed with sturdy 11-gauge thick steel, the cabinets are built to meet international fire codes. Cabinets come pre-installed with a 165°F (74°C ) sprinkler head near the exhaust vent. Cabinet doors and windows are made to close and latch automatically. The welded single body construction and rigid cylinder brackets increase sturdiness of the cabinet in the event of fires or earthquakes.

 

C-Series custom designed cabinets to suit any laboratory or analytical requirement. Possibilities include:

  • Cabinets with separate pressure controls to deliver multiple gases of similar composition that can be stored in the same location.
  • Cabinets for flammable gases that include emergency shut-off valves, gas detectors, and excess flow switches that can be integrated with a 585 Series emergency shut-off controller.
  • Cabinets for reactive gases that support a variety of purging options.

Materials

Enclosure 11-gauge (3mm) thick steel
Paint Epoxy Smooth interior, textured exterior
Fasteners Stainless Steel

Features

All Welded 11-Gauge Steel Construction
Protects cylinders and valves from damage

Epoxy Painted
Tough, protective coating

Sprinkler Head
Isolated fire protection

Removable White Back Panel
Facilitates ease of maintenance

Adjustable Brackets
Allow for precise hose alignment

Automatic Closing Door and Window with Keyed Door Latch
Prevent unwanted access to cylinder and gas system

Ventilation Louvers
Provide cabinet interior with adequate air flow circulation

C-Series Custom Cylinder Cabinets Ordering Information

Cabinet
  • C
Cylinders
  • 1: One
  • 2: Two
  • 3: Three
  • 4: Four
Regulator/Switchover Part Number
  • XXX XXXX-XXX
Description
  • One cylinder cabinet system for 400, 300, and 200 Series regulators with 529 Protocol Station Systems.
  • Two cylinder cabinet system for use with 515, 526, 527, 530, and 540 Series systems, 529 Series Protocol Station systems, and with all 400, 300, and 200 Series regulators.
  • Three cylinder cabinet system for use with 515, 526, 527, 530, 540 and 542 Series systems, 529 Series Protocol Station systems, and with all 400, 300, and 200 Series regulators.
  • Four cylinder cabinet system for use with 515, 526, 527, 530, 540 and 542 Series systems, 529 Series Protocol Station systems and with all 400, 300, and 200 Series regulators.

Specifications

Exhaust Duct
6″ (152mm) diameter
3″ (76mm) high

Sprinkler Head
165°F (74°C) activation point
Beeswax coated

Adjustable Cylinder Brackets
Accommodates 7″ (177 mm) to 9″ (228 mm) diameter cylinders.
Chain and strap included.

Fire-Rated Window
1/4″ thick clear wire glass

Empty Weight
C1: 250 lbs (113 kg)
C2: 275 lbs (125 kg)
C3: 375 lbs (170 kg)
C4: 470 lbs (213 kg)

For example, to order a single-cylinder cabinet system with a 422 Series regulator with an outlet pressure range of 0-50 PSIG (0-3.5 BAR), a 0-4000 PSIG (0-275 BAR) inlet pressure gauge, a diaphraam vaive with a 1/4″ compression tube fitting, PSIG/kPa pressure gauges, and a CGA 350 connection for hydrogen service with Protocol Station, the part number would be: C1-4222331-350M. If ordering a 2-cylinder cabinet with a 577 Series switchover for hydrogen use, the part number would be: C2-5274171-350

GET STARTED

Let's get to work.

Complete the form and one of WestAir’s gas experts will reach out to you to discuss your specific regulator needs.